ISM-50 on the MANAGER
Application of impeller by cars of this kind, as the power plant, allows to minimize loss of power of air flow of the fan created by krylchatka as the car has no air ducts on which overcoming of resistance, the considerable part of power of the electric motor is spent. To exclude hit in air inlet of the device of the small impurity which are on floor around машины owing to the constructive decision, node arrangement floor high relatively.
of 1 – Благодаря to the krylchatka of impeller developed especially for ISM cars by specialists of the Kharkov Aviation institute has become possible significantly to reduce electric motor power, thus to keep parameters of air flow and исключить vibrations.
2 – In the design, the car has no the nodes demanding cleaning in the course of work that does possible operation of the car without technology stops.
3 – Use of the frequency converter in standard complete set, for adjustment of turns of impeller, smooth start-up of the electric motor.
4 – Possibility of work of impeller in reverse mode, for cleaning of node.
Крыльчатка of impeller is made of steklougleplastik - fibreglass from 30% by carbon fiber addition.
Конструкционный polymeric composition material.
Corrosion resistance, small water absorption, high specific durability, anti-magnetic properties and technological effectiveness allow to use this material instead of non-ferrous metals, stainless steels and other scarce constructional materials. </>
Is created by span original design and the изготовления technology is developed; air screws from steklougleplastik. </>
Operation of the machine is reduced by span to change of trajectory of free fall «зерна» the air flow created block impellerom, and to further distribution and division of initial stock into fractions depending on the weight, the size and form.
Initial stock, further «зерно» moves in the bunker, it is distributed on tray width under body weight, and in such look comes uniform flow to the separation camera where there is its stratification and division on weight, the size and form, due to impact on grain of air flow from block impellera.
the grain Divided into fractions moves from the trays corresponding to fractions.
(The impeller separating car)
the Separator of grain (seeds) «ИСМ» is the bezreshetny car for очистки and the sorting of seeds calibrating in air flow. </> </>
Сепараторы ISM are intended to span by span:
For очистки and calibrations of seeds grain, leguminous, technical, и vegetable культур любой влажности;
For разделения zernosmesy;
For allocation from grain mix of the heavy and light impurity different from the main grain, including hardly separable (wild oats, the Tatar buckwheat, etc.) ;
For separation on viability and germinative energy of the seeds possessing лучшими sowing qualities;
Thanks to high resolution (accuracy ±3% on weight) separator «ИСМ» can make for one pass cleaning of seeds and simultaneous division of grain according to biological value and uniformity on fractions. I.e., сепаратор способен to replace two-three types of the cars connected in technology chain, dividing initial stock into 5 fractions.