Область температур
0 °C to +60 °C
Рабочее давление
max. 18 bar
Допуск по давлению
± 0.3 bar at 10 l/min
Корпус
Zinc
остальные детали
Brass, NBR, stainless steel
This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof. We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc. Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.
| Наименование | Резьба | Рабочее давление, предварительно настроенное | A mm |
B | SW mm |
|---|---|---|---|---|---|
| K- 07 25 02 75 | G 1/4 | 1 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 76 | G 1/4 | 2 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 77 | G 1/4 | 3 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 78 | G 1/4 | 4 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 79 | G 1/4 | 5 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 80 | G 1/4 | 6 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 81 | G 1/4 | 6,5 bar | 34.0 | 52.0 mm | 17 |
| K- 07 25 02 82 | G 1/4 | 7 bar | 34.0 | 52.0 mm | 17 |
Безналичный расчёт
Предоплата
Новая Почта
Самовывоз
Интайм
Гюнсел
Спецрахунок НБУ 
Фонд "Повернись живим" 
Фонд Сергія Притули 
