Свойства
Vacuum generator without control valves or system
monitoring functions, with a high maximum vacuum value (85%)
No moving parts, which means no wear and no maintenance
Maximum suction capacity with minimum compressed air
consumption
Minimum size, low weight
For decentralised vacuum generation in highly dynamic processes
Применение
For universal use in lightweight gripper systems
to handle air-tight workpieces as well as for automatic separation
systems,
e.g. in the plastics, electronics and packaging industries.
Also ideal for the construction of ejector blocks for decentralised
control of suction pads.
Корпус
Plastic (impact-resistant)
Соединение
Push-in coupling
Глушитель
Plastic
Рабочее давление
4.5 bar
Степень разрежения
85 %
Purely pneumatic vacuum ejector that operates on the Venturi principle. Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.
| Наименование | Степень разрежения % |
Размер форсунки | Вакуумное соединение | Подключение системы сжатого воздуха | Расход воздуха при всасывании l/min |
макс. скорость откачки l/min |
Размер |
|---|---|---|---|---|---|---|---|
| K- 07 45 01 13 | 85 | 01 | 4 mm | 4 mm | 14.0 | 8.0 | 71mm x 10mm x 28mm |
| K- 07 45 01 14 | 85 | 01 | 4 mm | 4 mm | 22.0 | 16.0 | 71mm x 10mm x 28mm |
| K- 07 45 01 15 | 85 | 01 | 8 mm | 6 mm | 48.0 | 37.7 | 97mm x 15mm x 40mm |
| K- 07 45 01 16 | 85 | 02 | 8 mm | 6 mm | 105.0 | 71.0 | 97mm x 15mm x 40mm |
| K- 07 45 01 17 | 85 | 02 | 10 mm | 8 mm | 197.0 | 127.0 | 168mm x 20mm x 46mm |
| K- 07 45 01 18 | 85 | 03 | 10 mm | 8 mm | 311.0 | 215.0 | 168mm x 20mm x 46mm |
Безналичный расчёт
Предоплата
Новая Почта
Самовывоз
Интайм
Гюнсел
Спецрахунок НБУ 
Фонд "Повернись живим" 
Фонд Сергія Притули 
